Basic Info.
Model NO.
DJYP2VP2
Wire Core Material
Copper
Certification
CE, ISO, RoHS, CCC, VDE
Model
Djypv/Djypvp
Brand
Qingxin
Sample
Available
ODM
Available
OEM
Available
MOQ
Sample Order/Small Order Can Be Acceptable.
Warranty Period
24 Months
Transport
by Sea. Express. Air
Lead Time
10-15days
Core Type
Solid or Stranded
Nominal Cross-Section
0.5-2.5mm
Rated Voltage
300/500V(U0/U)
Transport Package
100meter/Roll
Specification
35CM*35CM*15CM
Trademark
Qingxin
Origin
China
HS Code
854449210
Production Capacity
5000km/Month
Product Description
Product Description:
Computer cables belong to the category of electrical equipment cables. This cable is suitable for electronic computers and automation instruments with a rated voltage of 500V and below, which have high anti-interference requirements. According to different environments and equipment usage requirements, cable insulation can be made of materials such as polyethylene, polyvinyl chloride, cross-linked polyethylene, fluoroplastics, silicone rubber, etc.
There should be no open circuit between each twisted pair shield and between the twisted pair shield and the total shield
The cable core should withstand 50Hz and AC voltage of 2000V/1min or 1500V/5min without breakdown between the core and the shielding or other metal layers.
Polyethylene has high insulation resistance, good voltage resistance, low dielectric coefficient, and little influence of dielectric loss temperature and frequency variation. It not only meets the requirements of transmission performance, but also ensures the service life of the cable.
In order to reduce mutual crosstalk and external interference between circuits, cables need to adopt shielding structures. Shielding materials include tinned or non tinned copper wire, copper tape, copper plastic composite tape, aluminum plastic composite tape, etc. The metal tape is produced by wrapping, and the coverage rate should usually not be less than 15%. However, specific standards have special provisions, such as TICW/06, which stipulates that the coverage rate of shielding metal tape should not be less than 25%; The metal wire adopts weaving production method, and the weaving coverage rate should not be less than 80%. If there are high requirements for anti-interference, the coverage rate can not be less than 90%.
The shielding requirements for cables are adopted according to different occasions: sub shielding (only for twisted pairs, each pair has shielding), total shielding (the cable only has a layer of total shielding after the cable core is assembled), and sub shielding+total shielding (including both structures mentioned above). According to the higher requirements of users and usage scenarios, the overall shielding structure can adopt a composite shielding method, which includes two layers of shielding, composed of metal tape wrapping and metal wire weaving.
Note: If the cable has a sub shielding structure, the shielding pairs should have good insulation performance, and polyester tape or other non hygroscopic tape should be wrapped on the outer side of the sub shielding [2].
Model explanation:
| DJYPV | Polyethylene insulated twisted pair copper wire braided shielded PVC sheathed computer cable | Static shielding is required for indoor laying, cable trenches, pipelines, and other occasions |
| DJYVP | Polyethylene insulated twisted pair copper wire braided total shielding PVC sheathed computer cable | Static shielding is required for indoor laying, cable trenches, pipelines, and other occasions |
| DJYPVP | Polyethylene insulated twisted pair copper wire braided sub shielding and overall shielding PVC sheathed computer cable | Static shielding is required for indoor laying, cable trenches, pipelines, and other occasions |
| DJYP2V | Polyethylene insulated twisted copper tape shielded PVC sheathed computer cable | Static shielding is required for indoor laying, cable trenches, pipelines, and other occasions |
| DJYVP2 | Polyethylene insulated twisted copper tape overall shielding PVC sheathed computer cable | Static shielding is required for indoor laying, cable trenches, pipelines, and other occasions |
| DJYP2VP2 | Polyethylene insulated twisted copper tape with separate shielding and overall shielding PVC sheathed computer cables | Static shielding is required for indoor laying, cable trenches, pipelines, and other occasions |
| DJYP3V | Polyethylene insulated twisted aluminum plastic composite tape shielded PVC sheathed computer cable | Static shielding is required for indoor laying, cable trenches, pipelines, and other occasions |
| DJYVP3 | Polyethylene insulated twisted aluminum plastic composite tape total shielding PVC sheathed computer cable | Static shielding is required for indoor laying, cable trenches, pipelines, and other occasions |
| DJYP3VP3 | Polyethylene insulated twisted aluminum plastic composite tape with separate shielding and total shielding PVC sheathed computer cable | Static shielding is required for indoor laying, cable trenches, pipelines, and other occasions |
| DJYPVR | PE insulated twisted pair copper wire braided separately shielded PVC sheathed soft computer cable | Static shielding is required for indoor laying, cable trenches, pipelines, and other occasions |
| DJYVPR | Polyethylene insulated twisted pair copper wire braided total shielding PVC computer cable sleeve soft | Static shielding is required for indoor laying, cable trenches, pipelines, and other occasions |
| DJYPVPR | Polyethylene insulated twisted pair copper wire braided separately shielded and overall shielded PVC sheathed soft computer cable | Static shielding is required for indoor laying, cable trenches, pipelines, and other occasions |
| DJYP2VR | PE insulated twisted pair copper tape separately shielded PVC sheathed soft computer cable | Static shielding is required for indoor laying, cable trenches, pipelines, and other occasions |
| DJYVP2R | PE insulated twisted pair copper tape shielded PVC sheathed soft computer cable | Static shielding is required for indoor laying, cable trenches, pipelines, and other occasions |
| DJYP2VP2R | Polyethylene insulated twisted pair copper tape separately shielded and overall shielded PVC sheathed soft computer cable | Static shielding is required for indoor laying, cable trenches, pipelines, and other occasions |
| DJYP3VR | PE insulated twisted pair aluminum-plastic composite tape separately shielded PVC sheathed soft computer cable | Static shielding is required for indoor laying, cable trenches, pipelines, and other occasions |
| DJYVP3R | Polyethylene insulated twisted pair aluminum plastic composite tape general shielding PVC sheathed soft computer cable | Static shielding is required for indoor laying, cable trenches, pipelines, and other occasions |
| DJYP3VP3R | Polyethylene insulated twisted pair aluminum plastic composite tape separately shielded and overall shielded PVC sheathed soft computer cable | Static shielding is required for indoor laying, cable trenches, pipelines, and other occasions |
| DJYPV22 | Polyethylene insulated twisted pair copper wire braided and shielded PVC sheathed steel tape armored computer cable | When laying indoors, cable trenches, pipelines, etc., electrostatic shielding is required, and large mechanical external forces are applied to fixed fields and bear them |
| DJYVP22 | Polyethylene insulated twisted pair copper wire braided total shielding PVC sheathed steel tape armored computer cable | When laying indoors, cable trenches, pipelines, etc., electrostatic shielding is required, and large mechanical external forces are applied to fixed fields and bear them |
| DJYPVP22 | Polyethylene insulated twisted pair copper wire braided sub shielding and overall shielding PVC sheathed steel tape armored computer cable | When laying indoors, cable trenches, pipelines, etc., electrostatic shielding is required, and large mechanical external forces are applied to fixed fields and bear them |
| DJYP2V22 | Polyethylene insulated twisted copper tape with separate shielding, polyvinyl chloride sheathed steel computer cable with armor | When laying indoors, cable trenches, pipelines, etc., electrostatic shielding is required, and large mechanical external forces are applied to fixed fields and bear them |
| DJYVP2-22 | Polyethylene insulated twisted copper tape overall shielding PVC sheathed steel computer cable tape armor | Static electricity shielding is required for indoor laying, cable trenches, pipelines, etc., and large mechanical external forces can be fixed in the field and bear it |
| DJYP2VP2-22 | Polyethylene insulated twisted copper tape with partial and total shielding, PVC sheathed steel tape armored computer cable | Static electricity shielding is required for indoor laying, cable trenches, pipelines, etc., and large mechanical external forces can be fixed in the field and bear it |
| DJYP3V22 | Polyethylene insulated twisted aluminum plastic composite tape shielded PVC sheathed steel tape armored computer cable | Laying indoors, cable trenches, pipelines, etc. requires electrostatic shielding with large mechanical external forces, and the fixed field can withstand it |
| DJYVP3-22 | Polyethylene insulated twisted aluminum plastic composite tape overall shielding PVC sheathed steel tape armored computer cable | Laying indoors, cable trenches, pipelines, etc. requires electrostatic shielding with large mechanical external forces, and the fixed field can withstand it |
| DJYP3VP3-22 | Polyethylene insulated twisted aluminum plastic composite tape with separate shielding and overall shielding PVC sheathed steel tape armored computer cable | Laying indoors, cable trenches, pipelines, etc. requires electrostatic shielding with large mechanical external forces, and the fixed field can withstand it |
Computer cable specification:
| Number of pieces | Maximum outer diameter (mm) | Approximate weight (kg/km) | |||||
| Nominal cross section | wire diameter (mm) | DJYVP | DJYVP2 | DJYVP3 | DJYVP | DJYVP2 | DJYVP3 |
| 1×2×0.5 | 1/0.80 | 7.6 | 7.3 | 9.6 | 65 | 47 | 83 |
| 1×2×0.75 | 1/0.97 | 8.2 | 7.8 | 10 | 71 | 52 | 90 |
| 1×2×1.0 | 1/1.13 | 8.8 | 8.5 | 10.6 | 81 | 61 | 103 |
| 1×2×1.5 | 1/1.38 | 9.5 | 9.2 | 11.3 | 100 | 78 | 124 |
| 1×2×2.5 | 1/1.78 | 10.5 | 10.2 | 12.3 | 132 | 109 | 164 |
| 2×2×0.5 | 1/0.8 | 10.5 | 10 | 12.5 | 109 | 84 | 139 |
| 2×2×0.75 | 1/0.97 | 11.2 | 10.7 | 13.2 | 134 | 106 | 165 |
| 2×2×1.0 | 1/1.13 | 12.6 | 12.1 | 14.6 | 158 | 129 | 196 |
| 2×2×1.5 | 1/1.38 | 13.8 | 13.3 | 15.8 | 244 | 211 | 284 |
| 2×2×2.5 | 1/1.78 | 16.2 | 15.7 | 18.2 | 270 | 243 | 343 |
| 3×2×0.5 | 1/0.80 | 11 | 10.5 | 13 | 132 | 105 | 163 |
| 3×2×0.75 | 1/0.97 | 12.2 | 11.7 | 14.2 | 169 | 139 | 202 |
| 3×2×1.0 | 1/1.13 | 13.7 | 13.2 | 15.7 | 196 | 165 | 236 |
| 3×2×1.5 | 1/1.38 | 15 | 14.5 | 17 | 249 | 214 | 303 |
| 3×2×2.5 | 1/1.78 | 17.2 | 16.7 | 19.2 | 347 | 308 | 415 |
| 4×2×0.5 | 1/0.8 | 11.8 | 11.3 | 12.8 | 165 | 135 | 199 |
| 4×2×0.75 | 1/0.97 | 12.7 | 12.2 | 14.7 | 206 | 173 | 242 |
| 4×2×1.0 | 1/1.13 | 14.4 | 14 | 16.4 | 249 | 206 | 295 |
| 4×2×1.5 | 1/1.38 | 15.7 | 15 | 17.7 | 310 | 272 | 370 |
| 4×2×2.5 | 1/1.78 | 18.7 | 18.2 | 20.9 | 462 | 400 | 518 |
| 5×2×0.5 | 1/0.80 | 13 | 12.5 | 15 | 194 | 162 | 233 |
| 5×2×0.75 | 1/0.97 | 14 | 13.5 | 16 | 247 | 212 | 299 |
| 5×2×1.0 | 1/1.13 | 16 | 15.5 | 18 | 288 | 250 | 349 |
| 5×2×1.5 | 1/1.38 | 17.5 | 17 | 19.5 | 384 | 341 | 449 |
| 5×2×2.5 | 1/1.78 | 20.9 | 20.4 | 23 | 564 | 496 | 627 |
| 7×2×0.75 | 1/0.8 | 13.8 | 13.3 | 15.8 | 242 | 207 | 296 |
| 7×2×0.75 | 1/0.97 | 15.3 | 14.8 | 17.3 | 310 | 272 | 368 |
| 7×2×1.0 | 1/1.13 | 17.4 | 17 | 19.5 | 375 | 333 | 441 |
| 7×2×1.5 | 1/1.38 | 19 | 18.5 | 21.2 | 512 | 448 | 566 |
| 7×2×2.5 | 1/1.78 | 22.7 | 22.2 | 25 | 728 | 654 | 798 |
| 8×2×0.5 | 1/0.80 | 15.3 | 14.8 | 17.3 | 277 | 240 | 336 |
| 8×2×0.75 | 1/0.97 | 16.8 | 16.3 | 18.8 | 367 | 325 | 429 |
| 8×2×1.0 | 1/1.13 | 19.2 | 18.7 | 21.5 | 455 | 382 | 499 |
| 8×2×1.5 | 1/1.38 | 20.4 | 20 | 22.6 | 592 | 520 | 649 |
| 8×2×2.5 | 1/1.78 | 24.5 | 24 | 26.8 | 850 | 770 | 950 |
| 10×2×0.5 | 1/0.80 | 18.2 | 17.7 | 20.2 | 382 | 319 | 430 |
| 10×2×0.75 | 1/0.97 | 20 | 19.5 | 22 | 486 | 417 | 538 |
| 10×2×1.0 | 1/1.13 | 22.8 | 22.3 | 25 | 579 | 504 | 640 |
| 10×2×1.5 | 1/1.38 | 24.7 | 24.2 | 27 | 752 | 668 | 817 |
| 10×2×2.5 | 1/1.78 | 28.8 | 28.3 | 31.2 | 1155 | 1000 | 1210 |
| 12×2×0.5 | 1/0.80 | 18.8 | 18.3 | 21 | 425 | 360 | 474 |
| 12×2×0.75 | 1/0.97 | 20 | 20.2 | 22.8 | 545 | 472 | 597 |
| 12×2×1.0 | 1/1.13 | 23.5 | 23 | 25.8 | 652 | 574 | 715 |
| 12×2×1.5 | 1/1.38 | 25.4 | 26 | 27.6 | 850 | 765 | 920 |
| 12×2×2.5 | 1/1.78 | 30.7 | 30 | 32.8 | 1305 | 1150 | 1367 |
| 14×2×0.5 | 1/0.80 | 19.5 | 19 | 21.7 | 475 | 407 | 528 |
| 14×2×0.75 | 1/0.97 | 21.5 | 21 | 23.7 | 622 | 545 | 677 |
| 14×2×1.0 | 1/1.13 | 24.6 | 24.1 | 26.8 | 736 | 655 | 804 |
| 14×2×1.5 | 1/1.38 | 26.7 | 26.2 | 29 | 1030 | 883 | 1070 |
| 14×2×2.5 | 1/1.78 | 32.5 | 32 | 35 | 1480 | 1315 | 1544 |
| 16×2×0.5 | 1/0.80 | 21 | 20.5 | 23 | 538 | 466 | 594 |
| 16×2×0.75 | 1/0.97 | 23 | 22.5 | 25 | 694 | 613 | 752 |
| 16×2×1.0 | 1/1.13 | 26 | 25.5 | 28.4 | 823 | 738 | 919 |
| 16×2×1.5 | 1/1.38 | 28.5 | 28 | 31 | 1165 | 1010 | 1209 |
| 16×2×2.5 | 1/1.78 | 34.5 | 34 | 37 | 1675 | 1500 | 1743 |
| 19×2×0.5 | 1/0.80 | 22.4 | 22 | 24.4 | 610 | 535 | 669 |
| 19×2×0.75 | 1/0.97 | 23.7 | 23.2 | 25.7 | 790 | 706 | 854 |
| 19×2×1.0 | 1/1.13 | 27 | 26.5 | 29.4 | 854 | 863 | 1056 |
| 19×2×1.5 | 1/1.38 | 29.6 | 29.1 | 32 | 1350 | 1185 | 1396 |
| 19×2×2.5 | 1/1.78 | 36 | 35.5 | 38.5 | 1925 | 1740 | 1998 |
| 24×2×0.5 | 1/0.80 | 25.5 | 25 | 27.7 | 780 | 692 | 876 |
| 24×2×0.75 | 1/0.97 | 28.2 | 27.8 | 30.7 | 1100 | 940 | 1141 |
| 24×2×1.0 | 1/1.13 | 32.5 | 32 | 34.8 | 1320 | 1150 | 1378 |
| 24×2×1.5 | 1/1.38 | 35.2 | 34.7 | 37.6 | 1720 | 1910 | 2159 |
| 24×2×2.5 | 1/1.78 | 42.5 | 42 | 45 | 2465 | 2250 | 2555 |
| Maximum allowable working temperature (ºC) | Insulation material name | Sheath material name 2 |
| 70 | Polyethylene, polyvinyl chloride, thermoplastic polyolefin | Polyethylene, polyvinyl chloride |
| 90 | PVC, cross-linked polyethylene, thermoplastic or thermosetting polyolefins | Polyvinyl chloride, thermoplastic or thermosetting polyolefin |
| 105 | PVC, thermosetting polyolefin material | PVC, thermosetting polyolefin |
| 125,150 | Thermosetting polyolefin material | Thermosetting polyolefin |
| 180 | silicon rubber | silicon rubber |
| 200 | Fluoroplastics | Fluoroplastics |
| Note 1: For thermosetting polyolefin insulation exceeding 90 ºC, irradiation is recommended for crosslinking, especially for insulation materials with flame retardant requirements. | ||
| Note 2: Except for fluoroplastics and silicone rubber, if cost is not considered, other sheath materials can be matched and used in cables with insulation temperature levels lower than their own. | ||
Production process
Quality inspection:
Packaging methods:
FAQ
Q1:Who you are? What are your company's Main Products?
This is Qingdao Dadi Energy Co., Ltd. Our factory was established in 2017,located in Qingdao,China, specializing in manufacturing and selling full series of wires and cables, such as: rubber sheathed flexible cable, sheathed cable, control cable, power cable, aerial insulated cable, aluminum stranded wires and steel core aluminum stranded wires, PVC insulated non-sheathed (soft) wire and cable, special cable. Our annual production capacity can reach 150 million US Dollars. Our products comply with national or international standards, widely used in electric power, coal, transportation, construction, petroleum, chemical industry, metallurgy, aviation, railway and other industries.We have three independent workshops with a construction area of over 20000 square meters and over 100 skilled employees, Our factory's wires and cables have been certified by 28 European countries and exported to more than 100 countries and regions, with good reputation.
Q2: How can I get the Quotation of the products?
Pls send your demand or specification to us or just E-mail our trade Manager, We'll reply to you within 2 hours in the Working days.
Q3: What does your company do regarding Quality Control?
Firstly, All raw materials were selected are the highest quality level. Secondly,Professional and skillful workers care for every detail in handling the production. Thirdly, Quality Control Department is specially responsible for quality checking in each process and final check before shipping to our customers.
Q4: I didn't find my needed model in this page. Do you provide OEM Project Service?
Surely , our factory could manufacturing more than10000 models, OEM & ODM order is warmly welcome and we can you put your brand name, (logo) on these products. What's more, our R&D team will give you professional suggestions.
Q5: How could I get the Sample?
We are honored to offer you samples if we have it in stock, usually it is not free , but we will return it to your on first time mass order .but you need to pay the freight. If you have a courier account or forwarder in China, we can send it your courier to collect samples.
Q6: How long is the Delivery Time?
For Sample: 1-3 working days ; For small orders: 3-10 working days; For mass orders: 10-18 working days. It is better to communicate with us if you are interested to place an order. It depends on your order quantity.
Q7: What are your payment terms?
Our payment term is usually T/T 30% in advanced, the balance before picking up the goods or L/C at sight.
Q8: What is your Warranty? How about MOQ ?
All the products will have 24 months Warranty,Our company has MOQ requirement, but we also accept small quantity. We would love to grow up with every customers. Please feel free to contact us and send us your inquiry.